If you just bought a brand new laptop or desktop, then there’s a strong chance all your USB ports are USB 3.0. USB 3.0 is much more dependable, way faster, and the entire world is slowly adopting it since the new technology standard. Just read this article to know all about How to Fix USB Composite Device can’t work properly with USB 3.0. Let’s start!
However, if all your USB ports are 3.0, you guys run the risk of facing major compatibility issues. Whenever dealing with older devices that only know how you can use USB 2.0. By far, the biggest obstacles are encountered whenever trying to connect an old printer to a USB 3.0 port as well. Common error messages for this issue are “USB composite device is an older USB device and might not work in USB 3” as well as “USB Composite Device can’t work properly with USB 3.0″.
In theory, USB 3.0 is backward compatible and also should work just fine along with USB 2.0. However, the reality is, a lot relies on the age of your printer and the drivers you are working with. If you try to connect your old printer that uses USB 2.0 to a USB 3.0 port, then chances are it won’t work out as you expected. This is even more common if you’re using Windows 10 actually. Many users have also even reported that their USB 2.0 printers also have stopped working after a Windows 10 update. Although we can’t really know for sure if this was intentional, the global trend is definitely moving away from USB 2.0 as well.
However, don’t be so quick in throwing your printer out of the window. Before you accept the inevitable future, there are a few things that you can try to make your USB 2.0 printer compatible along with a USB 3.0 port.
- 1 How to Fix USB Composite Device can’t work properly with USB 3.0
How to Fix USB Composite Device can’t work properly with USB 3.0
Update USB Driver
Sometimes it is all about the driver actually. If it is corrupted, updated, or missing, then you may face the above issue.
- Tap on Windows key + R and then type devmgmt.msc and Enter to open Device Manager
- Then expand Universal Serial Bus controllers.
- Right-tap on Generic USB Hub and choose “Update Driver.”
- Now just choose to Browse my computer for driver software.
- Tap on Let me pick from a list of drivers on my computer.
- Choose Generic USB Hub from the list of drivers and tap on Next.
- Now, wait for Windows to finish the installation and then click Close.
- Make sure to follow steps 4 to 8 for all the “Generis USB Hub” that is present under Universal Serial Bus controllers.
- If the problem is still not resolved and then follow the above steps for all the devices listed under Universal Serial Bus controllers.
Disabling and re-enabling the USB controllers
If the first two methods have been unsuccessful, then let’s try uninstalling and reinstalling the native USB drivers. You guys might be dealing with corruption inside the USB controller drivers. Don’t be afraid of this procedure, then it’s completely harmless. Windows will automatically scan for hardware changes and then reinstall the correct drivers again automatically. Here’s what you need to do:
- Tap on Windows key + R to open up a Run command. Just type “devmgmt.msc” and hit Enter to open Device Manager.
- When you’re inside Device Manager, scroll all the way down to Universal Serial Bus controllers and then expand the entry.
- Right-tap on the first USB controller and tap on Uninstall to remove it.
- Now repeat the procedure with every USB controller that is listed under Serial Bus controllers. When you’ve uninstalled them all, restart your PC.
- Upon restart, Windows will now automatically scan for hardware changes and install the missing drivers. After that is complete, just plug in your printer again and see if you’re able to print.
Turn on USB legacy support in BIOS | Composite Device can’t work
If you are still struggling along with this problem you can opt for this method. You just have to access your BIOS settings to check if USB legacy support is enabled or not. If it is not enabled you have to enable it. Hopefully, you guys will get our problem solved.
- Just turn off your laptop, then turn it on and simultaneously press F2, DEL or F12 (Relying on your manufacturer) to enter into BIOS setup.
- Now navigate to Advanced via the arrow keys.
- Head to USB Configuration and then Enable USB legacy support.
- Just exit saving changes and check if you’re able to Fix a USB device is an older USB device and might not work USB 3.0 issue as well.
Run Hardware and Devices Troubleshooter
- Tap on Windows Key + I to open Settings and then click on the Update & Security icon.
- From the left-hand menu, then make sure to select Troubleshoot.
- Now under the “Find and fix other problems” section, tap on “Hardware and Devices“.
- Next, tap on Run the troubleshooter and follow on-screen instructions to Fix USB Composite Device that can’t work properly with USB 3.0.
Avoid Windows from turning off the devices | Composite Device can’t work
Have you guys ever noticed that for a moment your printer gets connected and then disconnected? Yes, there could be a Windows glitch that automatically turns off the device to save power. Mostly, it occurs just to save power in most of the devices, specifically in laptops.
- Tap on Windows +R and type “devmgmt.msc” and hit Enter to open Device Manager.
- You have to navigate to USB Serial Device Controllers.
- You need to locate USB Root Hub and then right-click on each USB Root Hub and navigate to Properties and then select the Power Management Tab.
- Here you have to uncheck the box “Allow the computer to turn off this device to save power“. At last, save your settings.
- Now reboot your system and try connecting your printer back.
Well, That is all from my side. If you want to know more about this article or have any queries. Then feel free to ask me anything in the comments section below.
Have a Good Day!