How to Root

Maui Meta Guide To Write or Repair IMEI

Written by Hassan Abbas

If you have a Mediatek phone and facing some IMEI issue then you are in the right place. In our guide, you’ll learn how to Write or Repair IMEI on Mediatek phone. But before we proceed further you must know the following thing:


We can also use Maui Beta to write the serial numbers using the Barcode option. Make sure Barcode should be 63 to 64 characters long.

You need Physical MediaTek smartphone, tablet or feature phone to follow the guide.

Maui Meta Guide To Write or Repair IMEI:

Step 1:

Download and install the Maui meta-tool on your computer. It should be installed in program files depending upon your PC’s architecture.

Step 2:

Once it is installed unzip it and launch it on your computer.

Step 3:

Once the Maui tool launched wait until its dashboard appears with a red circle.

Maui meta tool red

Step 4:

Under the Connection Type, select the Connection.

Note: Make sure if you’re having a smartphone then choose smartphone checkbox and if you’re having Feature phone then choose feature phone checkbox

Step 5:

Now at the top right-corner here is a Reconnect button. Click on it. 

Note: The color of the circle start changes between red and green. Switch off your phone.

Step 6:

After turning off your phone, connect your phone to PC via data cable.

Step 7:

Your phone will start booting up(got stuck into the boot animation). You need not worry your phone is in MAUI META mode. Once it in the Maui Meta Tool circle changes color and turns into yellow.

Maui Meta tool yellow

Note: To check your phone is detected or not, In the Get Version Box click Get Target Version for confirmation. Your phone details appear. Now checking details you can minimize it.

Step 8:

Now at the left corner, you’ll see the Dropdown Menu, Click on it and select IMEI download.

Step 9:

Now IMEIDownloadDialogBox windows will popup. Click on Change NVRAM Database File Button and locate the BP file.


Note: You can find the BP file on the stock firmware of your device or download the AP BP base collection.

Step 10:

Now enter 14 digit IMEI code in the IMEI Box. If your device is having multiple SIM support then do the same steps.

Note: 15 digits of IMEI entered into the checksum box.

Step 11:

Now click on the Download to Flash button to flash or install the IMEI.

Step 13:

Once it is installed you’ll see a confirmation message.

Congratulations! Now disconnect your phone from PC and restart it. Once it starts dial *#06# to verify the IMEI of your device.


All done! If you still find any difficulty then let us know in the comment section below!

Also Read: Slow Wifi after iOS 13.2 Update on iPhone? Here is the fix

About the author

Hassan Abbas

Tech enthusiast with too many items on his wish-list and not nearly enough money! Specializing in all things tech, with a slight Apple bent he has been writing for various blogs for the best part of (too many) years

Leave a Comment