Do you guys get error 0x80300024 during Windows installation? Error 0x80300024 is not really restricted to any specific version of Windows and hence, can actually occur during installation on any/all of these. Even though error 0X80300024 can really occur on any Windows version. It is most commonly seen whenever installing as well as reinstalling Windows 7 and Windows 10 operating systems actually. This issue also occurs whenever upgrading to Windows 10. Today, we are going to fix Windows 10 installation error 0x80300024. Just read this article to know all about How to Fix The Error 0x80300024 in Windows. Let’s start!
- 1 How to Fix The Error 0x80300024 in Windows
- 1.1 Connect to a Different USB Port
- 1.2 Free up disk space
- 1.3 Remove Supplementary Hard Drive
- 1.4 Set Target Hard Drive as First Choice
- 1.5 Format the Installation Partition | 0x80300024 in Windows
- 1.6 Check Peripheral Connections
- 1.7 Use DiskPart | 0x80300024 in Windows
- 1.8 Purchase a New HDD
- 1.9 Conclusion
How to Fix The Error 0x80300024 in Windows
The error 0X80300024 basically indicates that there is a problem, either software as well as hardware-related. Along with the hard drive partition where Windows installation files are actually located. Many other factors can also trigger this error as well:
- Insufficient space on the hard disk.
- Corrupt as well as broken Windows installation medium.
- Corrupt hard drive.
- Also, installation media plugged into a damaged USB port.
- Incompatible Hard drive and also driver software.
- Loose connection between the installation drive as well as the installation destination.
- Hardware or also software malfunctioning.
Now, let us just discuss the various methods to fix Windows 10 installation error 0x80300024.
Connect to a Different USB Port
Whenever installing Windows using a bootable USB drive containing Windows installation media, error 0x80300024 might occur because of the malfunctioning USB port. In these types of scenarios, you guys should:
- Just consider installing Windows without the USB drive.
- Plug it into another USB port — swap the USB 2.0 port with the USB 3.0 port, or vice versa.
Free up disk space
The Windows 10 installation error 0x80300024 can also be caused via the lack of disk space on your PC. Hence, you’ll have to free up space on your hard drive. So that Windows installation files may be saved and installed properly. Listed below are basically two ways in order to resolve storage space issues.
Option 1: Delete Unrequired Data
- Just delete temporary files.
- Delete unwanted as well as useless files & folders.
Option 2: Format the Hard-drive
- You have to insert/plug the installation media and then restart the computer.
- Now after that, Accept the licensing terms and choose the preferred language.
- Just select Custom from the Which type of installation do you want? screen.
- In order to format the destination drive, you need to tap on Drive Options.
- Then after choosing the appropriate partition, just tap on Delete.
- In order to restart the installation, you have to click on Next.
This will format the selected drive and free up disk space so that you guys can install Windows without even any errors.
Remove Supplementary Hard Drive
If you guys have employed more than one hard drive, then either of them can be assigned as the installation location. During the installation procedure, the supplementary drive basically comes into conflict along with the destination drive. If this is actually the case, error 0x80300024 may appear whenever installing Windows operating system. To resolve these conflicts,
- We basically recommend that you remove the supplementary hard drive from the PC.
- Now, try installing the operating system again.
- After you’ve successfully installed Windows, then you can reconnect the hard drive.
Set Target Hard Drive as First Choice
It is also possible that the Windows installation destination disc isn’t specified as the primary boot disc. Hence, resulting in error 0x80300024. You have to ollow the steps below in order to fix the desired disk as primary hard-drive manually:
- Start the PC and head to the computer BIOS setup.
Note: To do this, you may have to hit the F1, F2, or Del keys. The key, in order to access the BIOS screen, differs relying on the computer manufacturer & device model.
- Now look for your PC Boot order or configuration in the BIOS setup.
- You have to check if the destination Hard Drive is the first choice in the boot order. If not, then just set it as the First choice.
- Now Save the modifications that you’ve made and exit BIOS thereafter.
Format the Installation Partition | 0x80300024 in Windows
If the HDD partition on which you guys are trying to install Windows has not been generated recently. Then the installation process may also get hampered via the existing data on that drive. Thus, formatting the installation partition before installing Windows is important to resolve the issue as well as avoid it altogether.
- First, Restart the PC after inserting a bootable Windows installation disc.
- In the BIOS screen, just choose to boot from the installation media that you inserted in Step 1.
- Now, select your keyboard layout, language, and many other settings.
- Whenever the notification pops up, just choose the Custom: Install Windows Only (advanced) option.
- Now tap on Drive options on the Windows Setup screen prompting Where do you want to install Windows?
- Choose the Hard Drive partition where you guys want Windows to be installed and then select Format.
- Now Confirm the formatting process and then let it finish.
- Then, to continue installing Windows, just tap on Next.
Check Peripheral Connections
If you guys are having trouble with error 0x80300024, then you should double-check that all of your peripherals are connected properly.
- Make sure that a steady connection is maintained between the installation drive and the installation location.
- Also, determine if the installation location has sufficient space or not.
- When you’ve checked everything, then restart the computer in order to get rid of minor glitches and bugs.
Use DiskPart | 0x80300024 in Windows
This Windows installation error 0x80300024 might also occur because of a corrupt hard drive partition table. Here’s how you guys can fix it:
- First, open Command Prompt from the Start Menu via searching cmd in the Windows search bar.
- Just type Diskpart and click on the Enter key.
- Then type List Disk, in order to get a list of all device partitions.
- Whenever the setup is listing all the partitions, then you have to note the System partition.
- You need to type Select Disk 1 whenever replacing 1 along with the partition number of the system partition.
- Now type Clean and click on Enter in order to execute.
Purchase a New HDD
If none of the solutions we also offered above have been able to address error 0x80300024. Then it may be time to consider purchasing a new hard drive as well. The hard drive on your PC may also be defective, thereby causing problems in the Windows installation process as well. Just buy a new hard drive and connect it to your PC. The said error should now be rectified and you should no longer face errors during the installation of Windows 10 as well.
Well, That is all from my side. If you want to know more about this article or have any queries. Then feel free to ask me anything in the comments section below.
Have a Good Day!
Also See: How to Convert EXE File to APK File